HydraLine
is flexible stainless steel braided brake line which outlasts
conventional steel brake tubing due to its durable material in harsh
environments.
Quicker
to fit up, with no flaring required on tubing, HydraLine takes about
1/5th of the time to fit in comparison to conventional brake tubing. There
are also less joins than conventional steel brake tubing, decreasing
fitting time, and adds to the strength and durability.
HydraLine
can be installed by sliding the flexible line up the box section of the
trailer and pulling through holes where required. This is not only a
neater finish to the trailer, but also means the brake line is protected
inside the trailer.
Kit contents:
Qty 1 - HydraLine 6500mm lead line with straight ends.
Qty 2 - HydraLine 1000mm brake line with straight ends.
Qty 2 - HydraLine 500mm brake line with straight ends.
Qty 3 - HydraLine 2000mm brake line with a 90 degree end
Qty 3 - HydraLine 700mm brake line with a 90 degree end
Qty 5 -3 way brass tee piece
HydraLine
is flexible stainless steel braided brake line which outlasts
conventional steel brake tubing due to its durable material in harsh
environments.
Quicker
to fit up, with no flaring required on tubing, HydraLine takes about
1/5th of the time to fit in comparison to conventional brake tubing. There
are also less joins than conventional steel brake tubing, decreasing
fitting time, and adds to the strength and durability.
HydraLine
can be installed by sliding the flexible line up the box section of the
trailer and pulling through holes where required. This is not only a
neater finish to the trailer, but also means the brake line is protected
inside the trailer.
Kit contents:
Qty 1 - HydraLine 6500mm lead line with straight ends.
Qty 2 - HydraLine 1000mm brake line with straight ends.
Qty 2 - HydraLine 500mm brake line with straight ends.
Qty 3 - HydraLine 2000mm brake line with a 90 degree end
Qty 3 - HydraLine 700mm brake line with a 90 degree end
Qty 5 -3 way brass tee piece
HydraLine
is flexible stainless steel braided brake line which outlasts
conventional steel brake tubing due to its durable material in harsh
environments.
Quicker
to fit up, with no flaring required on tubing, HydraLine takes about
1/5th of the time to fit in comparison to conventional brake tubing. There
are also less joins than conventional steel brake tubing, decreasing
fitting time, and adds to the strength and durability.
HydraLine
can be installed by sliding the flexible line up the box section of the
trailer and pulling through holes where required. This is not only a
neater finish to the trailer, but also means the brake line is protected
inside the trailer.
Kit contents:
Qty 1 - HydraLine 6500mm lead line with straight ends.
Qty 2 - HydraLine 1000mm brake line with straight ends.
Qty 2 - HydraLine 500mm brake line with straight ends.
Qty 3 - HydraLine 2000mm brake line with a 90 degree end
Qty 3 - HydraLine 700mm brake line with a 90 degree end
Qty 5 -3 way brass tee piece